hello iam in the process of make a smalle cage for a young t+ stimmy and was wondering how people attatch the plastic tracks to the enclosure it is a plywood enclosure with a pine substrate damb i would like to use screw also if possible
Thank you i ended up using liquid nails and some some small nails to hold them it place wile the glue drys seems to have worked it is only a 2 foot cage so not alot of strength needed anywayI used small screws in my first ever enclosures, after that I just used construction adhesive. I think Liquid Nails is the best known brand, I usually used cheaper brands, I found them all to be as good as each other. Builders adhesive lasted longer, I never had it fail even after 20 or so years.
Thank you i ended up using liquid nails and some some small nails to hold them it place wile the glue drys seems to have worked it is only a 2 foot cage so not alot of strength needed anyway
Thank you and yeah liquid nails seems to be quite strong i just added a few small nails to mine to hold in place wile it dried it seems to have workedLiquid nails is all you need. I scored up the back of the track with a Stanley knife and roughed up the timber I was glueing it to with sandpaper. This probably isn’t even necessary but I figured there was no harm in doing it. After it had cured I physically attempted to pry and rip the track off with all my strength and I failed big time haha
Liquid nails is all you need. I scored up the back of the track with a Stanley knife and roughed up the timber I was glueing it to with sandpaper. This probably isn’t even necessary but I figured there was no harm in doing it. After it had cured I physically attempted to pry and rip the track off with all my strength and I failed big time haha
Enter your email address to join: