Beardie set up

Aussie Pythons & Snakes Forum

Help Support Aussie Pythons & Snakes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

LazyLizard

Not so new Member
Joined
Sep 30, 2008
Messages
20
Reaction score
0
Location
adelaide
:? hi guys just a quick question regarding lights and heating for my beardie enclosure...

I have an enclosure 2000mm L x 800L x 800D and have a couple of options for the lights and heating as i can get some stuff cheap as, just dont know which to get....

either.. 2 x or 1 exo-terra repti-glo dessert uv tubes 10's or 8's with an infrared heat glo lamp 150w
or
2x or 1 exo tera repti glo dessert uv tubes 10's or 8's with a 150 basking light and a 100w moonlight glo light( for night time viewing)

also i'll have a day/night dimming thermostat and timer for it.
which would guys recomend as best to use?
thnks guys :D
 
I would use a 40-60w uva/uvb heat globe,if you want to use a stat i would use a dimming.
No stat needed if cool end has suitable temps.
Then use a normal/standerd fluro for lighting.
Would reccomend natural sunlight at every chance you get.
 
:D thnx for the tips but as i said i can get the above items dirt cheap so was wondering the best way to go out of the options i mentioned coz i can grab a whole lot of stuff cheap but only what was there. If that stuff wont do the job then i guess i can use something else just id save a fortune is all. :D
 
Status
Not open for further replies.
Back
Top