Co2 Kit setup help

[Aussie-Pride]

Heya peeps

I'm just wondering what shops sell soda stream kits.. and what else I need to make a euthanzing chamber.. I know I have to connect a hose from the soda stream to a container and need a small hole in the top of it for the air to escape so it doesn't blow up the container so to speak,is there anything I'm missing..

If anyone can give me a link or help would be much appreciated.

 

[Heelssss]

Try big w or kmart

 

[-Katana-]

http://www.aussiepythons.com/forum/diy-zone-5392/co2-gas-chamber-instructions-94534/

 

[cools2036]

http://www.aussiepythons.com/forum/showthread.php?t=179655

Easiest setup

 

[AndrewHenderson]

I don't use a click clack, they leak and aren't very good. Get a thick plastic bag, put the rats in squeeze out the air and put the tube in the bag and fill it while choking the top with your hands, fill it up like a balloon just don't let it pop and twist shut to stop it coming out. they die in about 2 seconds flat this way. My experience with click clacks is they take at least 15-20 seconds due to leakage in the seals.

 

[cools2036]

Lock and lock containers are rubber sealed an don't leak FYI .
Each their own though...
As using a click clack u do need a diffuser hole

 

[Aussie-Pride]

I've made what I need but yet to try it out.

Cheers for the replies, much appreciated.