DonnB
Well-Known Member
Thanks. Its because of this thread!!!
make sure you don't drop the shutter speed below 1/125 as most on camera flash will not sync below that shutter speed i.e if the shutter speed is at 1/90 then the shutter will be too slow to catch the flash.
What do you mean by this? I've never heard of a shutter speed being too slow for a flash. I know the opposite problem occurs - most dSLRs won't let you use a shutter speed above 1/250 sec when using the built-in flash.
Stewart
PS: Jordo - thanks for the plug!
I duno about the built in flash, but I know that if you aren't using a tripod then you dont really want to drop below 1/250sec or you'll experience blurryness...
yeah.. lolI don't have image stabiliser on my macro so im stuck with 1/125 and dropping DOF
ahh well hehehe
What do you mean by this? I've never heard of a shutter speed being too slow for a flash. I know the opposite problem occurs - most dSLRs won't let you use a shutter speed above 1/250 sec when using the built-in flash.
Stewart
PS: Jordo - thanks for the plug!
Anyone use extension tubes for macro? I am considering getting one as macro lens are far to expensive for me,and i am not looking for super close ups.
Most cameras actually sync at 1/90 but the newer ones are faster. It simply has to do with the mechanical parts of the shutter anything slower than 1/125 as a generalisation would mean that by the time the shutter opens the flash has already occured light is much faster than any mechanical part man has ever made hence the flash sync on cameras. This means that the internal settings of each camera is set to this i.e the flash will only fire when the shutter is fully open. As a suggestion for using on camera flash there should be a setting on your flash that says slow sync. It is best to have this on as it extends the burst of the flash the camera will now to only fire the flash after the shutter has opened. It's kinda a helping hand setting.
You're correct mate, it all depends on the speed of the camera firing the flash, some camera models will fire the flash before the shutter is fully open others don't. It's just a generalisation on the workings of the camera. It's just playing it safe really. What we are trying to do is ensure that the flash only fires when the camera is fully open as when you use fully manual on your camera, on some camera it turns off all it's internal sync settings. So unless you know the camera inside out it's just playing safe. Once the shutter is open you can fire the flash at anytime really.Maybe we're talking about two different things. You seem to be saying that the longer the shutter is open, the less likely it is to capture a flash. Or am I misunderstanding you? I know for a fact that I can use a flash on a camera with a shutter speed of 5 seconds (or 30 seconds), because I do that quite often.
Stewart